5.发表的代表性论文及著作 论文 (1)Changxi Liu, Zhengong Zhou, Xiaohong Wang, Boming Zhang. Evaluate the Bearing Strength of Single-shear Bolt Jointed Composite Laminates Structure and Research on the Test Fixture. Journal of testing and evaluation (ASTM)(2017,45(4):1344-1361) (2)Changxi Liu, Zhengong Zhou, Xiaohong Wang, Boming Zhang. The Research on the Effect of the Fixture on the Properties of the Single-shear Bolt Jointed Composite Laminates Structure. Journal of Harbin Institute of Technology(New Series).2017,24(2):19-29 (3)Changxi Liu, Xiaohong Wang, Yunlong Wang. Analysis on the process of stress transferring in single fiber composite and Monte-Carlo simulation on the process of single-fiber fragmentation. Journal of Reinforced Plastics and Composites. 2014.3, 33(12):1105-1119.(SCI,IF=1.188) (4)Changxi Liu, Zhengong Zhou, Xiaohong Wang, Boming Zhang. Analysis and Determination for Parameters of "Cohesive Elemen" in Numerical Model of Single Fiber Composites. Journal of Reinforced Plastics and Composites. ?2012.9, 31(17): 1127-1135.(SCI,IF=1.188). (5) Changxi Liu, Hao Li, Fengfa Zhang, Xiaohong Wang. Improvement on the passive method based on dampers for the vibration control of spacecraft solar panels[J]. Advances in Mechanical Engineering, 2022, Vol. 14(3) 1-16 (6)刘长喜,周振功,王晓宏,张博明,唐占文. 结合改进单胞模型的单钉双剪层合板结构挤压性能的多尺度表征分析.复合材料学报.2016.33(3):650-656.(EI) (7)刘长喜,周振功,王晓宏,张博明,唐占文. 层合板螺栓连接结构性能影响因素与夹具研究. 哈尔滨工程大学学报.2016,37(8):1130-1135.(EI) (8)刘长喜,周振功,张博明等. 螺栓连接层合板结构失效模式多尺度数值分析.哈尔滨工业大学学报.2014,46(5):40-45.(EI) (9)刘长喜,周振功,张博明等. 层合板连接结构挤压强度测试方法的研究.材料开发与应用. 著作 (1)《化工设备拆装实训教程》》化学工业出版社.2018.7 ?参编 (2)《机械制图》中国电力出版社. 2017.5参编 (3)《理论力学》. 清华大学出版社. 2012.9参编 |